Serving Salt Lake City and the Salt Lake Valley since 2006
Licensed & InsuredFree EstimatesMon-Fri 7am-6pm
(385) 622-8922 Licensed & Insured
Get a Free Floor Estimate

Epoxy Flooring in Murray, UT

Salt Lake City Superior Epoxy Flooring provides professional epoxy flooring in Murray, UT. We install basement floor epoxy, garage floor coatings, flake and metallic epoxy floors, one-day polyaspartic systems, polished concrete and commercial quartz floors, and we repair failed coatings. Basements and slabs on grade get a free ASTM F1869 or F2170 moisture test before we quote.

Murray calls itself the Hub of Salt Lake County, and with 50,637 people at the 2020 census it's nearly built out. Most of our work here is on established homes and businesses, not new construction.

Free Estimate in Murray

Or call (385) 622-8922

Basement Floors Near Murray's Creeks and River

Big Cottonwood Creek and Little Cottonwood Creek both join the Jordan River inside Murray, and wetlands line the river and both creeks. Water is never far away in a lot of this city.

The Utah Geological Survey maps the majority of Murray in high or moderate liquefaction zones. Liquefaction risk follows loose sediment with shallow groundwater, and shallow groundwater is also what pushes moisture up into basement slabs.

So we don't guess in a Murray basement. Calcium chloride domes under ASTM F1869 sit 60 to 72 hours, or ASTM F2170 RH probes read after 24 hours at 40% of slab depth. Over 3 lbs or 80% RH, a moisture-mitigating epoxy primer goes down first, adding $1.50 to $3 per sq ft.

Floors over that primer carry a 10-year warranty against peeling, bubbling and delamination. A coating won't stop liquid water coming through a crack, though. If we see that, you need drainage or waterproofing before you need a floor.

Older Murray Homes and the Floors They Get

Murray's smelters ran from 1870 until the last one, the ASARCO lead smelter, closed in 1949, and the neighbourhoods around the old downtown grew up alongside them. The Murray Downtown Residential Historic District still holds some of that early housing.

Older basement slabs here tend to be uneven and patched, with old paint or tile adhesive on top. We grind all of it off on HEPA extraction, fill low spots and cracks, and only then put down a coating. Stair landings and laundry rooms get grit in the topcoat.

Finished basement family rooms often get metallic epoxy at $9 to $14 per sq ft, a design floor with no grout lines. Storage rooms and home gyms usually get flake or solid-color epoxy, and a basement of about 800 sq ft runs $4,000 to $6,800.

Garages on older lots carry decades of salt and oil. A full-broadcast flake system at $5.50 to $8 per sq ft covers pitting and stains, and stem walls up to 12 inches tall are coated at no charge.

Basement and Commercial Floors in Murray

Service Bays, Clinics and Polished Floors in Murray

Murray's commercial side is big. Auto dealerships line State Street, where Larry H. Miller bought his first dealership in 1979, and the city's largest employer is the Intermountain Medical Center campus, built on the old smelter site after the stacks came down in 2000.

Dealership service bays need quartz broadcast or high-build epoxy with grit, with quartz at $8 to $12 per sq ft. Clinics get quartz with an integral cove base at $12 to $20 per linear ft, and showrooms and offices often go polished concrete at $3.50 to $8 per sq ft.

Murray sits in the middle of our service area, so crews pass through on the way to Draper, UT and every other part of the valley. Installs here run 7 to 14 days out.

Working With Us in Murray

Call (385) 622-8922, Mon-Fri 7am-6pm, and we'll call back within 2 business hours. Jared Nielsen or our estimator visits within 3 business days.

You get an itemized quote by email the same day, with moisture testing, crack and spall repair and stem walls already in the price. Commercial work can run nights and weekends at no surcharge.

We're licensed through the Utah Division of Professional Licensing (DOPL) and insured. Our own crews handle everything from the initial grind to the final topcoat.

Murray Epoxy Flooring Questions

Why do you moisture test every basement in Murray?

Because the creeks, the river and the shallow groundwater here can push vapor up through a slab, and that's what makes basement coatings bubble. The test is free and takes 24 to 72 hours depending on the method.

What if water actually comes through my basement floor?

Then a coating isn't the first fix. Liquid water through a crack or wall joint needs drainage or waterproofing first, and we'll tell you that at the estimate.

Can you coat a basement slab with old tile adhesive on it?

Yes, after we grind the adhesive off. Nothing bonds well to old glue, so it all comes up on HEPA extraction before the primer goes down.

Do you install floors in dealership service bays?

Yes. Service bays get quartz broadcast or high-build epoxy with grit, coved where washdown runs, and we install on nights and weekends at no surcharge.

How much does a basement floor cost in Murray?

For a basement of about 800 sq ft, budget $4,000 to $6,800. If the moisture test calls for the mitigating primer, add $1,200 to $2,400.

Book a Murray Floor Estimate

Call us at (385) 622-8922 or send the form. Moisture testing is free on every basement we quote.