
Polyaspartic Floor Coatings in Salt Lake City, UT
Salt Lake City Superior Epoxy Flooring offers professional polyaspartic floor coatings in Salt Lake City, UT with 20 years of experience and one-day garage installs on the schedule every week. Polyaspartic is an aliphatic polyurea: it cures in hours, holds its color in sun and goes down on a slab as cold as 40°F. We use it as the topcoat on every residential flake system, and as a full one-day system over a polyurea base when you need the floor back fast.
On a one-day polyaspartic floor you walk in 6 hours and park in 24, or 48 when the slab is under 50°F. Here's the catch: polyaspartic has a short pot life, so prep and crew speed matter more, not less. We still diamond grind to ICRI CSP 2-3 and fill every crack before the first coat. Polyaspartic floor coating systems run $6 to $9 per sq ft.
Get a FREE Estimate
Or call (385) 622-8922
Polyaspartic Floor Coating Systems
Polyaspartic shows up in almost everything we install. These are the five ways we use it.

One-Day Polyaspartic Garage Floors
Polyurea base coat, full-broadcast 1/4-inch flake and a clear polyaspartic top, all in 1 day. The crew grinds in the morning and topcoats in the afternoon. It's the system for people who can't give up the garage for three days, at $6 to $9 per sq ft.

Polyaspartic Topcoats Over Epoxy
On our 2-day flake floors, 100% solids epoxy builds the body and polyaspartic goes on top for UV stability and abrasion resistance. Epoxy gives the crew a longer working window on big floors. You park at 72 hours.

Clear Polyaspartic Sealer for Bare Concrete
Some people like the look of their gray slab and just want salt and oil to stop soaking in. A ground slab with a clear polyaspartic coat keeps the concrete look and stops the brine at the surface. Grit goes in so it isn't slick when wet.

Polyaspartic Patio and Outdoor Coatings
Outside, polyaspartic is the only top we'll use, because aromatic epoxy ambers in direct sun. Patios, porches and pool decks get a textured system with aluminum oxide grit or flake for $6 to $9.50 per sq ft. We schedule them April through October.

Polyaspartic Coatings for Businesses That Can't Close
Retail backrooms, dealership bays and small shops get the fast-cure system on nights and weekends. Walk on it in 6 hours and roll carts the next day. We phase larger floors so part of the space stays open.
Before and After
Polyaspartic vs Epoxy: What Each Layer Does
People ask which one is better. In our floors, they do different jobs. Epoxy bonds hard to ground concrete, builds thickness cheaply and stays workable long enough to broadcast flake across a big room.
Polyaspartic handles the surface. It's aliphatic, so UV doesn't yellow it, it stands up to abrasion and brine, and it cures in hours. Aromatic epoxy left on top will amber at the garage door within a few summers at this elevation.
So our rule is epoxy or polyurea underneath, polyaspartic on top. The only time we'd skip polyaspartic is a basement storage room with no sun and no tires, where a urethane top does the job for less.
Why Polyaspartic Is Our Winter Coating
Salt Lake City sits at or below freezing an average of 127 days a year, and inversion weeks keep unheated garages cold for days at a time. Epoxy wants the slab at 55°F or warmer and rising, plus 5°F above the dew point. A January garage rarely gets there.
Years ago, one of our crews put an epoxy base down in an unheated garage during a week-long inversion. The slab sat under 40°F, and the coat was still tacky three days later. That job is why, from November through March, unheated residential garages get polyaspartic, which cures on a slab as cold as 40°F.
Every crew carries an infrared thermometer and checks the dew point before mixing anything. If the slab reads too cold even for polyaspartic, we reschedule rather than gamble with your floor.
Here's the Catch With One-Day Floors
Polyaspartic sets fast in the bucket too. Once it's mixed, the crew has a short window to roll it out evenly, and mistakes can't be fixed once it cures. That's why DIY polyaspartic kits go wrong so often, and why we don't send new hires to run one alone.
Fast cure never means fast prep. A one-day floor gets the same CSP 2-3 grind, crack chasing and double vacuum as a 2-day floor. The hours saved come from chemistry, not from skipping steps on the slab.
Not every floor should be a one-day job. A basement that reads over 3 lbs or 80% RH needs a moisture-mitigating primer that takes its own cure time, so plan on 2 days plus the test visit.
Our One-Day Polyaspartic Process
Morning: read the slab
We check the slab temperature and dew point first. We also tape the walls and protect your door weatherstripping before the grinder ever hits the floor.
Grind and vacuum
We diamond grind to CSP 2-3 using HEPA extraction, grind edges by hand, and run two passes with the vacuum.
Fast-cure repairs
We chase cracks and fill them with polyurea. It cures in minutes and we grind it flush so it won't show through the finish.
Base coat and flake
We spread the polyurea base in sections and broadcast 1/4-inch flake to rejection. Then we scrape and vacuum the loose chips.
Afternoon: polyaspartic top
We apply the clear polyaspartic topcoat. You can walk on the floor in 6 hours and park your vehicle after 24 hours.
Polyaspartic Floor Coating Questions
Is polyaspartic the same thing as polyurea?
Polyaspartic is an aliphatic polyurea. Our one-day system uses a polyurea base for bonding and a polyaspartic topcoat to handle UV, abrasion, and brine.
Why doesn't everyone install one-day floors?
The short pot life leaves little room for error, and crews have to be good at it. Some installers also skip the grind to hit one day, which is how fast floors fail. We don't.
Can polyaspartic go over my old epoxy floor?
Yes, we can do that over a sound epoxy floor if we abrade the surface so the new coat bonds. If the old floor is peeling or lifting, we grind it off first. A new topcoat won't hold a failing coating down.
Can you install a polyaspartic floor in December?
Yes, as long as the slab reads 40°F or warmer. Below a 50°F slab, give it 48 hours before you park instead of 24.
How does polyaspartic hold up to road salt?
Well. Brine sits on the surface instead of soaking into the slab. Squeegee it out on dry winter days and mop with a pH-neutral cleaner, and the white crust comes right off.
Book a One-Day Polyaspartic Floor
Give us a call at (385) 622-8922, or send the form. Most installs are 7 to 14 days out, and each crew holds 1 rush slot a week for closings and move-ins.